Category Archives for "Tools & Equipment"

The Expert’s Advice On How To Use Floor Jacks And Jack Stands To Lift A Car

A lot of you know that I love cars. But what many people don’t know is that I spent 5 years working in my Uncle’s garage. I’m not a professional or certified mechanic by all means, but working on various old and new cars, trucks, and SUV’s for a good part of my youth made me a walking encyclopedia when it comes to car maintenance.

What really surprises me is the lack of knowledge on the proper way to jack up a car. I wrote a helpful guide on that topic. If you haven’t read it, I highly suggest you check it out.

Anyway, I was perplexed to find out that some of my friends (who happen to be HUGE car nuts) don’t even know how to use a floor jack. Some don’t even know how to use jack stands.

Continue reading

Stop Messing Around! This Is The Proper Way On How To Jack Up A Car

If you own a vehicle (or if you are seriously considering buying one) then you need to know the proper way on how to jack up a car. If you don’t, then you might end up damaging your ride, or you might have to explain to the police on how a driverless vehicle managed to careen down a busy and inclined street on its own behest. Not a pretty thought, right?

If you need to change a flat tire, then you will obviously need to jack up the car. If you need to do some light repair work on the brakes, steering, and suspension, then you will also need to raise the vehicle. Jacking up your car is inevitable. It is bound to happen, and you will need to do it in one way or another.

In that regard, there is no harm is doing it perfectly each and every time. Your car is equipped with a scissor jack from the factory and it is located in the trunk next to the spare tire (if your car is equipped with a spare tire). The scissor jack is good enough if you need to raise the vehicle to change a flat tire. Although raising the scissor jack will involve a bit of elbow grease, you can purchase an aftermarket bottle jack/floor jack or alligator jack to make the job easier.

You don’t need to buy the best floor jack to lift your vehicle. What you need is the right knowledge and technique to get the job done in the fastest and most efficient way possible.

Continue reading

The 5 Best Floor Jacks You Can Buy For Your Car


Introduction of floor jack

Owning a car is not as simple as it seems as it not only requires you to fill up the tank and drive, but also needs to be taken good care of. In order to keep your car well maintained, you would have to make sure you change the oil at the right time, take it to the mechanic for bi or tri-monthly check-ups and keep it polished and waxed. For most issues that may arise in your car, you might not want to take it to the mechanic, but work on it yourself instead.

When it comes to working on your car, you may need different sets of tools for fixing different problems. It is extremely important that you have the right set of tools at your disposal. Using damaged or inadequate tools can lead to a number of problems, which include a lot of time being wasted, frustration, broken car parts and even severe injuries to the DIY-er.

There have been a number of reported cases of serious accidents while working on cars and most of these accidents were caused by using worn-out tools. This is why it is highly recommended that you buy the best tools for your car to ensure maximum safety and convenience. A floor jack is one the most important and commonly used tools and is found in almost every car. While they are used for changing tires most of the time, they are also used for a number of other purposes. Some tasks would require you to lift your car up using a floor jack and crawl under it.

**Below, you'll find our more detailed reviews, but you can also click the links above to see current prices or read customer reviews on Amazon.

Continue reading

The Best Jack Stands You Can Find In The Market

Cars break down, and when you are under the vehicle and repairing it, safety becomes the most important thing, both for you and for the automobile. There are a number of tools available in the market designed to ensure a safe working environment, and jack stands are among them.

One of the most obvious and common ways to keep yourself safe while lifting your car for repair is to ensure you have a good, high-quality floor jack. However, a floor jack alone can only help you so much. This is because floor jacks comprise of moving parts that are prone to damage and wear, and they can become weak over time or outright fail with time and use. The scariest and most dangerous part about floor jack letdowns is they typically come in the form of a slow leak.

As such, they are infamous for slowly letting a vehicle down on top of someone as the hydraulics drop pressure and the risk situation is usually noticed once the damage has been done and it becomes too late to escape. This is exactly why it is never a good idea to crawl underneath your car when the only support it has is from a floor jack. So, what else should you do to make an elevated car safe to crawl under? The answer is simple: add a jack stand.

Jack Stands

Jack stands are the primary tools for preventing cars from collapsing and slipping by providing strong support. It is important to keep in mind that jacks stands are not 100% foolproof and it is therefore advised that you invest in at least two of the best jack stands. This way, should a car collapse, the stands will share the load over a larger area equally and thus prevent accidents. They are tripod or tower shaped and designed to support the hefty weight of a mounted vehicle. They should be placed under the vehicle frame or axle to offer added support for a raised car.

After a vehicle is jacked up, the stands are put back in place and the car is lowered onto the stands. The saddle-shaped parts on jack stands are there to support the car axle. These stands should only be used on flat and hard surfaces and only for automobiles that fall under the weight limit of the stands.

You can find jack stands in different kinds and they are categorized by weight capacity and maximum height. Most of the time, the jack stand’s weight capacity is expressed in tons and the height in inches. Typically, they are sold in pairs and usually used in combination with floor jacks. The weight capacity of the stand can go from 2 tons to 25 tons. The height can range from 13 to 25 inches, and can go as high as 6 feet.

**Below, you'll find our more detailed reviews, but you can also click the links above to see current prices or read customer reviews on Amazon.

Continue reading